浏览全部资源
扫码关注微信
1.中国林业科学研究院木材工业研究所，北京 100091
2.山东晟昌新材料有限公司，山东临沂 276000
纸质出版日期： 2024-03-30 ，
扫 描 看 全 文
贺颖奇,张亚梅,余养伦等.压缩率和施胶量对毛白杨重组木干状和湿状表面粗糙度的影响[J].木材科学与技术,2024,38(02):51-59.
HE Yingqi,ZHANG Yamei,YU Yanglun,et al.Effects of Compression Ratio and Resin Content on Dry and Wet Surface Roughness of Populus tomentosa Wood Scrimber[J].Chinese Journal of Wood Science and Technology,2024,38(02):51-59.
表面粗糙度是评价木质材料表面质量和加工性能的重要指标之一。以毛白杨（
Populus tomentosa
）单板和酚醛树脂为原料，采用单因素试验制备重组木，探讨压缩率（50%、55%、59%）和施胶量（10%、15%、20%）对重组木干状和湿状表面粗糙度的影响。结果表明，压缩率对干状和湿状表面粗糙度影响显著，且对干状表面粗糙度的影响大于湿状；随着压缩率的增大，重组木的干状表面粗糙度逐渐降低，湿状表面粗糙度逐渐增大；施胶量对干状和湿状表面粗糙度影响显著，且对湿状表面粗糙度的影响大于干状；随着施胶量的增加，重组木干状和湿状表面粗糙度均逐渐降低。与毛白杨单板相比，在压缩率为59%和施胶量为15%时，重组木干状粗糙度参数
R
a和
R
z分别降低了79.64%和73.07%，湿状粗糙度参数
R
a和
R
z分别降低了62.85%和50.00%。在实际生产过程中，可通过控制压缩率和施胶量调控重组木干状和湿状表面粗糙度，以满足不同应用场景对重组木材料表面粗糙度的需求。
Surface roughness was one of the important factors to evaluate the surface quality and processing performance of wood materials. In this study
wood scrimber was prepared with
Populus tomentosa
veneer and phenolic resin using single-factor tests to investigate the effects of
the compression ratios (50%
55%
59%) and resin contents (10%
15%
20%) on the dry and wet surface roughness of wood scrimber. The results showed that the effect of the compression ratio on dry and wet surface roughness was significant; the effect on dry surface roughness was greater than that on wet surface roughness. With the increase in compression ratio
the dry surface roughness of the wood scrimber decreased gradually
and the wet surface roughness increased gradually. The effect of the resin content on dry and wet surface roughness was significant; the effect on wet surface roughness was greater than that on dry surface roughness. With the increase of the resin content
both dry and wet surface roughness of wood scrimber decreased gradually. Compared with
Populus tomentosa
veneer
when the compression ratio was 59% and the resin content was 15%
the dry roughness parameters
R
a and
R
z of wood scrimber were reduced by 79.64% and 73.07%
respectively; the wet roughness parameters
R
a and
R
z were reduced by 62.85% and 50.00%
respectively. In the actual production process
the dry and wet surface roughness of the wood scrimber can be managed by controlling the compression ratio and resin content to meet the needs of different application scenarios.
重组木干状表面粗糙度湿状表面粗糙度压缩率施胶量
wood scrimberdry surface roughnesswet surface roughnesscompression ratioresin content
SUN X F, HE M J, LIANG F, et al. Experimental investigation into the mechanical properties of scrimber composite for structural applications[J]. Construction and Building Materials, 2021, 276: 122234.
WEI J G, RAO F, ZHANG Y H, et al. Laminating wood fiber mats into a densified material with high performance[J]. Materials Letters, 2019, 253: 358-361.
ZHANG Y M, HUANG X A, ZHANG Y H, et al. Scrimber board (SB) manufacturing by a new method and characterization of SB’s mechanical properties and dimensional stability[J]. Holzforschung, 2018, 72(4): 283-289.
于文吉. 我国重组材料科学技术发展现状与趋势[J]. 木材科学与技术, 2023, 37(1): 1-7.
YU W J. Current status and future trend of science and technology for reconstituted materials in China[J]. Chinese Journal of Wood Science and Technology, 2023, 37(1): 1-7.
JIANG H, WANG L, LIU Q, et al. Superhydrophobic poplar scrimber via in situ synthesis of Cu7Cl4(OH)10·H2O heterostructure inspired by pine cone with superultraviolet resistance[J]. ACS Sustainable Chemistry & Engineering, 2022, 10(49): 16169-16181.
BAO M Z, TANG R Q, BAO Y J, et al. Changes in chemical composition, crystallizability, and microstructure of decayed wood-fiber-mat-reinforced composite treated with copper triazole preservative[J]. Forests, 2022, 13(9): 1387.
LIU S Q, HUANG Y X, LIN Q Q, et al. Discoloration of Eucalyptus wood veneer based on the immobilization of polyphenols by ferrous ions[J]. Industrial Crops and Products, 2023, 193: 116189.
吴智慧. 木家具制造工艺学[M]. 2版. 北京: 中国林业出版社, 2012.
青龙, 邢东, 王喜明, 等. 木材切削表面粗糙度研究进展及测定方法探讨[J]. 林产工业, 2021, 58(2): 27-30.
QING L, XING D, WANG X M, et al. Discussion and research progress about determination method of wood cutting surface roughness[J]. China Forest Products Industry, 2021, 58(2): 27-30.
XI B Y, Clothier B, Coleman M, et al. Irrigation management in poplar (Populus spp.) plantations: a review[J]. Forest Ecology and Management, 2021, 494: 119330.
张求慧, 钱桦. 家具材料学[M]. 北京: 中国林业出版社, 2012.
李黎, 杨永福. 家具及木工机械[M]. 北京: 中国林业出版社, 2002.
BAO M Z, HUANG X N, ZHANG Y H, et al. Effect of density on the hygroscopicity and surface characteristics of hybrid poplar compreg[J]. Journal of Wood Science, 2016, 62(5): 441-451.
ZHANG Y H, HUANG Y X, QI Y, et al. Novel engineered scrimber with outstanding dimensional stability from finely fluffed poplar veneers[J]. Measurement, 2018, 124: 318-321.
梁艳君, 张亚慧, 余养伦, 等. 铺装方式对杨木重组木性能的影响[J]. 木材工业, 2017, 31(3): 40-43.
LIANG Y J, ZHANG Y H, YU Y L, et al. Effect of strand mat forming on poplar scrimber properties[J]. China Wood Industry, 2017, 31(3): 40-43.
韦亚南, 张亚慧, 张亚梅, 等. 浸胶疏解单板含水率对杨木重组木性能的影响[J]. 木材工业, 2017, 31(4): 35-38.
WEI Y N, ZHANG Y H, ZHANG Y M, et al. Effect of moisture content of impregnated veneer on properties of poplar scrimber[J]. China Wood Industry, 2017, 31(4): 35-38.
林秋琴, 吴江源, 黄宇翔, 等. 热压温度和密度对柏木重组木性能的影响[J]. 木材科学与技术, 2021, 35(4): 51-56.
LIN Q Q, WU J Y, HUANG Y X, et al. Effects of hot-pressing temperature and density on properties of Cupressus funebris scrimber[J]. Chinese Journal of Wood Science and Technology, 2021, 35(4): 51-56.
杨春梅, 李月茹, 田心池, 等. 密度和含水率对竹基纤维复合材料抗弯性能的影响[J]. 木材科学与技术, 2023, 37(3): 44-50.
YANG C M, LI Y R, TIAN X C, et al. Effects of density and moisture content on flexural properties of bamboo-based fiber composites[J]. Chinese Journal of Wood Science and Technology, 2023, 37(3): 44-50.
WEI Y N, RAO F, YU Y L, et al. Fabrication and performance evaluation of a novel laminated veneer lumber (LVL) made from hybrid poplar[J]. European Journal of Wood and Wood Products, 2019, 77(3): 381-391.
Dwianto W, Morooka T, Norimoto M. Compressive creep of wood under high temperature steam[J]. Holzforschung, 2000, 54(1): 104-108.
Javed M A, Kekkonen P M, Ahola S, et al. Magnetic resonance imaging study of water absorption in thermally modified pine wood[J]. Holzforschung, 2015, 69(7): 899-907.
WANG J F, YAO Y, HUANG Y Q, et al. Effects of the combination of compression and impregnation with phenolic resin on the dimensional stability in the multiscale wood structure of Chinese fir[J]. Construction and Building Materials, 2022, 327: 126960.
Gindl W. Impregnation of softwood cell walls with melamine-formaldehyde resin[J]. Bioresource Technology, 2003, 87(3): 325-330.
XU C H, CAO Y Z, CHEN H L, et al. Large-scale and high-resolution visualization of static mechanical properties of wood-adhesive interphase utilizing nanoindentation mapping[J]. Wood Science and Technology, 2022, 56(4): 1029-1045.
Gindl W, Schöberl T, Jeronimidis G. The interphase in phenol–formaldehyde and polymeric methylene di-phenyl-di-isocyanate glue lines in wood[J]. International Journal of Adhesion and Adhesives, 2004, 24(4): 279-286.
韦亚南, 魏金光, 张亚梅, 等. 浸胶量对杨木重组木物理力学及表面性能的影响[J]. 林业工程学报, 2018, 3(2): 11-15
WEI Y N, WEI J G, ZHANG Y M, et al. Effect of resin content on the physical-mechanical and surface properties of poplar scrimber[J]. Journal of Forestry Engineering, 2018, 3(2): 11-15.
相关作者
相关机构
京公网安备11010802024621
微信公众号