浆锚栓钉连接钢-正交胶合木组合梁抗弯性能有限元分析

李荣帆; 凌志彬; 穆泉蒙; 张赫男

doi:10.12326/j.2096-9694.2022006

研究报告 | 浏览量 : 0 下载量: 9 CSCD: 0

PDF
导出
分享
收藏
专辑

浆锚栓钉连接钢-正交胶合木组合梁抗弯性能有限元分析
Finite Element Analysis on Flexural Behavior of Steel-Cross Laminated Timber Composite Beams Connected with Studs Embedded in Grout Pockets
1.苏州科技大学土木工程学院，江苏苏州 215009
2022年36卷第3期页码：80-89
DOI： 10.12326/j.2096-9694.2022006

扫描看全文

李荣帆,凌志彬,穆泉蒙等.浆锚栓钉连接钢-正交胶合木组合梁抗弯性能有限元分析[J].木材科学与技术,2022,36(03):80-89.

LI Rong-fan,LING Zhi-bin,MU Quan-meng,et al.Finite Element Analysis on Flexural Behavior of Steel-Cross Laminated Timber Composite Beams Connected with Studs Embedded in Grout Pockets[J].Chinese Journal of Wood Science and Technology,2022,36(03):80-89.
李荣帆,凌志彬,穆泉蒙等.浆锚栓钉连接钢-正交胶合木组合梁抗弯性能有限元分析[J].木材科学与技术,2022,36(03):80-89. DOI： 10.12326/j.2096-9694.2022006.

LI Rong-fan,LING Zhi-bin,MU Quan-meng,et al.Finite Element Analysis on Flexural Behavior of Steel-Cross Laminated Timber Composite Beams Connected with Studs Embedded in Grout Pockets[J].Chinese Journal of Wood Science and Technology,2022,36(03):80-89. DOI： 10.12326/j.2096-9694.2022006.

摘要

设计一种浆锚栓钉连接的钢-正交胶合木（CLT）组合梁，基于ABAQUS研究栓钉直径、槽口间距及栓钉排布等参数对钢-CLT组合梁的抗弯性能及抗滑移性能的影响，结合组合结构基本理论对组合梁的抗弯承载力及抗弯刚度进行理论预测。结果表明，模拟得到的荷载-跨中挠度关系曲线表现出明显的屈服拐点，呈“二折线”特征，且曲线弹性段与完全组合界线接近，表明浆锚栓钉连接钢-CLT组合梁具有很好的延性行为和较高的组合效率。浆锚栓钉连接钢-CLT组合梁的组合效率平均能达0.80~0.97，且栓钉直径与槽口间距是影响浆锚栓钉连接钢-CLT组合梁整体性能的重要参数。

Abstract

A steel-Cross Laminated Timber (CLT) composite beam connected with studs embedded in grout pockets was designed. The effects of the stud diameter, pocket spacing, and stud arrangement on the flexural performance and anti-slip performance of the steel-CLT composite beams were investigated based on ABAQUS. The theoretical prediction of the flexural load capacity and flexural stiffness of the composite beams was conducted by combining with the basic theory of the composite structure. The results showed that the numerically obtained load-mid-span deflection curves were characterized by two-well defined linear parts with an distinct yield point. The simulated load-mid-span deflection curves were close to the boundary line for the full composite action in the initial stage indicating a high composite efficiency for the composite beams with studs embedded in grout pockets connection. The coefficient of the composite efficiency of studs embedded in grout pockets connected steel-CLT composite beams was between 0.80 and 0.97 on average. The stud diameter and pocket spacing are important parameters which affect the overall performance of the steel-CLT composite beam connected by studs embedded in grout pockets.

关键词

钢-CLT组合梁栓钉连接抗弯性能抗滑移性能

Keywords

steel-CLT composite beamstud connectionflexural behavioranti-slip performance

references

王希珺, 李征, 何敏娟. 竖向拼缝对正交胶合木剪力墙抗侧性能的影响[J]. 南京工业大学学报(自然科学版), 2021, 43(3): 366-371.

WANG X J, LI Z, HE M J. Influence of wall-to-wall vertical connections on the lateral performance of cross-laminated timber shear walls[J]. Journal of Nanjing Tech University (Natural Science Edition), 2021, 43(3): 366-371.

蔡金妹, 张仁杰, 余泓睿, 等. 正交胶合木增强叠木斗栱受力性能试验[J]. 南京工业大学学报(自然科学版), 2021, 43(3): 399-410.

CAI J M, ZHANG R J, YU H R, et al. Experimental study on mechanical performance enhancement of glulam superposed bracket set with cross-laminated timber[J]. Journal of Nanjing Tech University (Natural Science Edition), 2021, 43(3): 399-410.

龚迎春, 叶琦, 武国芳, 等. 国产落叶松正交胶合木顺纹抗压强度尺寸效应[J]. 木材科学与技术, 2021, 35(1): 42-46.

GONG Y C,YE Q,WU G F, et al.Effect of Size on compressive strength parallel to the grain of cross-laminated timber made with domestic larch[J]. Chinese Journal of Wood Science and Technology, 2021, 35(1): 42-46.

Hassanieh A, Valipour H R, Bradford M A. Load-slip behaviour of steel-cross laminated timber (CLT) composite connections[J]. Journal of Constructional Steel Research, 2016, 122: 110-121.

Wang C L, Lyu J F, Zhao J, et al. Experimental investigation of the shear characteristics of steel-to-timber composite joints with inclined self-tapping screws[J]. Engineering Structures, 2020, 215: 110683.

董惟群, 姚悦, 宋焕, 等. 自攻螺钉连接正交胶合木抗剪承载力研究[J]. 木材工业, 2018, 32(5): 1-5.

DONG W Q, YAO Y, SONG H, et al. Shear strength of cross-laminated timber connected with self-tapping screws[J]. China Wood Industry, 2018, 32(5): 1-5.

Ataei A, Chiniforush A A, Bradford M, et al. Cyclic behaviour of bolt and screw shear connectors in steel-timber composite (STC) beams[J]. Journal of Constructional Steel Research, 2019, 161: 328-340.

姚雪峰. 钢-木组合梁抗弯力学性能研究[D]. 大连: 大连理工大学, 2017.

邹伟. 薄壁H型钢—木组合梁受弯承载力计算分析研究[D]. 绵阳: 西南科技大学, 2018.

金许奇, 柏亚双, 徐国林. 基于螺栓连接的薄壁钢-木组合梁承载力影响因素分析[J]. 西南林业大学学报(自然科学), 2018, 38(4): 167-172.

JIN X Q, BAI Y S, XU G L. Analysis of influencing factors on bearing capacity of thin-walled steel-wood composite beams connected by bolts[J]. Journal of Southwest Forestry University (Natural Sciences), 2018, 38(4): 167-172.

Hassanieh A, Valipour H R, Bradford M A. Composite connections between CLT slab and steel beam: experiments and empirical models[J]. Journal of Constructional Steel Research, 2017, 138: 823-836.

Hassanieh A, Valipour H R, Bradford M A. Bolt shear connectors in grout pockets: finite element modelling and parametric study[J]. Construction and Building Materials, 2018, 176: 179-192.

Hassanieh A, Valipour H R, Bradford M A. Experimental and numerical investigation of short-term behaviour of CLT-steel composite beams[J]. Engineering Structures, 2017, 144: 43-57.

王连广. 钢与混凝土组合结构理论与计算[M]. 北京: 科学出版社, 2005.

张爱平. 钢-混组合结构栓钉连接件抗剪性能研究[D]. 杭州: 浙江大学, 2020.

刘慧芬, 何敏娟, 高承勇. 木结构销类连接的屈服点和延性定义方法比较[J]. 特种结构, 2015, 32(3): 1-5, 106.

LIU H F, HE M J, GAO C Y. Comparison of definition methods of ductility and yield point of dowel-type connection of timber structure[J]. Special Structures, 2015, 32(3): 1-5, 106.

LING Z B, XIANG Z, LIU W Q, et al. Load-slip behaviour of glue laminated timber connections with glued-in steel rod parallel to grain[J]. Construction and Building Materials, 2019, 227: 117028.

冯鹏, 强翰霖, 叶列平. 材料、构件、结构的“屈服点”定义与讨论[J]. 工程力学, 2017, 34(3): 36-46.

FENG P, QIANG H L, YE L P. Discussion and definition on yield points of materials, members and structures[J]. Engineering Mechanics, 2017, 34(3): 36-46.

Hassanieh A, Valipour H R, Bradford M A. Experimental and numerical study of steel-timber composite (STC) beams[J]. Journal of Constructional Steel Research, 2016, 122: 367-378.

R.Gutkowski K. Laboratory tests of composite wood-concrete beams[J]. Construction and Building Materials, 2007, 22(6): 26-34.

中华人民共和国住房和城乡建设部. 钢结构设计标准: GB 50017—2017[S]. 北京: 中国建筑工业出版社

Shi B K, Liu W Q, Yang H F. Experimental investigation on the long-term behavior of prefabricated timber-concrete composite beams with steel plate connections[J]. Construction and Building Materials, 2021, 266: 120892.

聂建国, 沈聚敏, 余志武. 考虑滑移效应的钢-混凝土组合梁变形计算的折减刚度法[J]. 土木工程学报, 1995, 28(6): 11-17.

NIE J G, SHEN J M, YU Z W. A reduced rigidity method for calculating deformation of composite steel concrete beams[J]. China Civil Engineering Journal, 1995, 28(6): 11-17.

BS EN 1995-1-1， Design pf timber structures: Part 1-1: General common rules and rules for building[S]. London: British Standards Institution, 2004.

Zhang C. Analysis of the Timber-Concrete Composite Systems with Ductile Connection[D]. University of Toronto (Canada). 2013.

Chybiński M, Polus Ł. Theoretical, experimental and numerical study of aluminium-timber composite beams with screwed connections[J]. Construction and Building Materials, 2019, 226: 317-330.

聂建国, 崔玉萍, 石中柱, 等. 部分剪力连接钢──混凝土组合梁受弯极限承载力的计算[J]. 工程力学, 2000, 17(3): 37-42.

NIE J G, CUI Y P, SHI Z Z, et al. Ultimite flexural capacity of composite steelconcrete beams beams with partial shear connection[J]. Engineering Mechanics, 2000, 17(3): 37-42.

文章被引用时，请邮件提醒。

提交

暂无数据