最新刊期
      期 0 ， 2020
      • HU Jian hong
        Issue 6, Pages: 3-5(2001) DOI: 10.19455/j.mcgy.2001.06.001
        摘要：The necessity and feasibility of developing system furniture for mass customization are introduced and key technologies are expounded. Meanwhile, application prospects and development countermeasures for domestic furniture manufacturing business are discussed.  
        关键词：Mass customization;Furniture industry;System furniture   
        16
        |
        218
        |
        43
        <HTML>
        <L-PDF>
        <引用本文> <批量引用> 6615403 false
        发布时间：2021-02-08
      • CHEN Yu he,HU Wei hua,CHANG De long
        Issue 6, Pages: 6-8(2001) DOI: 10.19455/j.mcgy.2001.06.002
        摘要：The Paulownia （ Paulownia elongafa ）veneer was bleached by a group of compound wood bleaching agents in this paper. Relative factors affecting the decomposition rate of H 2O 2 were studied based on the orthogonal experiment by testing the concentration of H 2O 2 with KMnO 4.  
        关键词：Paulownia Wood;Hydrogen peroxide solution;Bleaching   
        10
        |
        251
        |
        36
        <HTML>
        <L-PDF>
        <引用本文> <批量引用> 6615393 false
        发布时间：2021-02-08
      • YANG Wen bin 1,MA Shi chun 2,XIAO Zhong ping 2
        Issue 6, Pages: 9-11(2001) DOI: 10.19455/j.mcgy.2001.06.003
        摘要：Drying characteristics of European Beech （ Fagus sylvatica ） were analysed by using 100℃ test. The results showed that the drying rate was just more than moderate. There was a slight distortion in cross section of boards. The amount of initial check and internal check was in medium degree, but the lengths and widths of the checks were in light degree. There was a great difference in drying shrinkage of boards between tangential and radial directions.  
        关键词：test;Beech;Drying characteristics   
        12
        |
        79
        |
        3
        <HTML>
        <L-PDF>
        <引用本文> <批量引用> 6615444 false
        发布时间：2021-02-08
      • DU Guo xing,CAI Jia bin,CAO Xiang
        Issue 6, Pages: 12-13(2001) DOI: 10.19455/j.mcgy.2001.06.004
        摘要：Drying technology for 23 mm thick Oriental Oak （Quercus variabilis） board was studied. The results showed that the board could be dried from initial moisture content of 48.1% to final average moisture content of 9.3% in 16 days without obvious drying defect, such as split, bow, crook, twist and so on. The results also showed that the drying schedule for 23 mm thick Oriental Oak flooring board offered by this study was reasonable and suitable.  
        关键词：Flooring board;Drying technology;Oriental oak   
        12
        |
        60
        |
        12
        <HTML>
        <L-PDF>
        <引用本文> <批量引用> 6614996 false
        发布时间：2021-02-08
      • LONG Chuan wen 1,KUANG Kong tang 2,WU De zheng 3
        Issue 6, Pages: 14-15(2001) DOI: 10.19455/j.mcgy.2001.06.005
        摘要：An orthogonal experiment was done in order to find the relationship between manufacturing technological parameters of bamboo wood particleboard and quality of board. Based on difference analysis of testing results, applicable and suitable manufacturing technological condition for bamboo wood particleboard production were put forward.  
        关键词：Bamboo wood particleboard;Technological condition;Quality   
        11
        |
        105
        |
        14
        <HTML>
        <L-PDF>
        <引用本文> <批量引用> 6615046 false
        发布时间：2021-02-08
      • XIAO Zhong ping,LU Ji sheng
        Issue 6, Pages: 16-18(2001) DOI: 10.19455/j.mcgy.2001.06.006
        摘要：This paper deals with manufacturing technology of fire retardant treated glue laminated wood （GLW） from Chinese Fir （ Cunninghamia lanceolata） thinning The result showed that the glue laminated wood indicated good fire retardant effect and its physical and mechanical properties could reach requirement of JAS It would be suitable for interior building material and furniture making, etc  
        关键词：Chinese Fir thinning;Fire retardant;Glue laminated wood （GLW）   
        12
        |
        71
        |
        5
        <HTML>
        <L-PDF>
        <引用本文> <批量引用> 6615007 false
        发布时间：2021-02-08
      • WANG Wei hong,PU An bin,LU Ren shu,LI Xin
        Issue 6, Pages: 19-21(2001) DOI: 10.19455/j.mcgy.2001.06.007
        摘要：Based on the budget, investment and economic indexes, the economic analyses and comparison for setting up cement particleboard （CP） and gypsum particleboard （GP） projects with annual output of 15 000 m 3 were studied. The results of this study would be helpful for feasibility study of inorganic bonded composite project.  
        关键词：Cement particleboard （CP）;Gypsum particleboard （GP）;Economic index   
        9
        |
        107
        |
        7
        <HTML>
        <L-PDF>
        <引用本文> <批量引用> 6615410 false
        发布时间：2021-02-08
      • MENG Qing wu,LI Chuan xin,GAN Xin ji
        Issue 6, Pages: 22-24(2001) DOI: 10.19455/j.mcgy.2001.06.008
        摘要：In this paper, the effect of saw side clearance angle and saw cutting amount on surface cutting roughness was analyzed. The relationship between saw side clearance angle and roughness was also studied. Results indicated that the surface roughness would not be effected by saw cutting amount as long as saw side clearance angle wasn’t changed. This study may be helpful for developing new type of saws and improving cutting quality and efficiency.  
        关键词：Saw;Saw side clearance angle;Saw cutting amount;roughness   
        10
        |
        65
        |
        9
        <HTML>
        <L-PDF>
        <引用本文> <批量引用> 6615025 false
        发布时间：2021-02-08
      • MA Shi chun,YANG Wen bin,XIAO Zhong ping,RAO Jiu ping
        Issue 6, Pages: 25-26(2001) DOI: 10.19455/j.mcgy.2001.06.009
        摘要：Some Southern Type Poplar planks were dried with the comprehensive vapor drying technology which combined by high temperature and conventional drying technology in this experiment. The test results showed that the comprehensive vapor drying technology would not only shorten drying time, but also improve drying quality.  
        关键词：Comprehensive vapor drying technology;Southern Type Poplar   
        7
        |
        44
        |
        2
        <HTML>
        <L-PDF>
        <引用本文> <批量引用> 6615162 false
        发布时间：2021-02-08
      • LIU Zhan mei,SHAO Guang yi,WU Yun,ZHANG Hong chun
        Issue 6, Pages: 27-28(2001) DOI: 10.19455/j.mcgy.2001.06.010
        摘要：In the production of melamine impregnated paper for overlaying under the condition of low pressure and short cycle, the solidification of melamine formaldehyde （MF） resin causes impregnated paper fragile and easy to break. To solve the problem, it was proposed to use butylglycol monoether to enhance the plasticity of melamine formaldehyde resin. The application of butylglycol monoether in impregnated paper production was also introduced.  
        关键词：Plastication;MF resin;Butylglycol monoether   
        10
        |
        237
        |
        11
        <HTML>
        <L-PDF>
        <引用本文> <批量引用> 6615059 false
        发布时间：2021-02-08
      • HE De fang,CUI Cheng fa,ZENG Qi jun,SONG Jie
        Issue 6, Pages: 29-30(2001) DOI: 10.19455/j.mcgy.2001.06.011
        摘要：Based on the experiments of bamboo veneer peeling, the technical requirements and compositive application measures relating on bamboo veneer peeling were discussed and analysed.  
        关键词：Bamboo veneer;Peeling technology   
        9
        |
        76
        |
        7
        <HTML>
        <L-PDF>
        <引用本文> <批量引用> 6615152 false
        发布时间：2021-02-08
      • HUANG Ming 1,YANG Qiu ping 2
        Issue 6, Pages: 31-32(2001) DOI: 10.19455/j.mcgy.2001.06.012
        摘要：The relationship between the design of equipment for wood preservation and environment protection was discussed in this article.  
        关键词：Equipment for wood preservation;design;Environment protection   
        5
        |
        33
        |
        0
        <HTML>
        <L-PDF>
        <引用本文> <批量引用> 6615036 false
        发布时间：2021-02-08
      • Ferrotec China,Hangzhou 310005)
        Issue 6, Pages: 33-34(2001) DOI: 10.19455/j.mcgy.2001.06.013
        摘要：The product characteristics and technology for carbide circular ultra thin saw blades manufactured by Ferrotec China are introduced in this article.  
        关键词：Circular saw blade;Ultra thin saw blade;Ferrotec China   
        16
        |
        160
        |
        4
        <HTML>
        <L-PDF>
        <引用本文> <批量引用> 6615017 false
        发布时间：2021-02-08
      0