Study on Restraining Wood Drying Warp Distortion by Surface Pressuring
- Issue 2, (1998)
DOI: 10.19455/j.mcgy.1998.02.002
扫 描 看 全 文

1. Research Institute of Wood Industry
扫 描 看 全 文
[1]李晓玲,滕通濂.材面加压防止干燥翘曲变形的探讨[J].木材工业,1998(02):6-8.
Li Xiaoling Ten Tonglian. Study on Restraining Wood Drying Warp Distortion by Surface Pressuring. [J]. China Wood Industry (2).(1998)
本文对杨木、长白落叶松等几种短周期工业材进行材面加压与不加压干燥对比试验,探索了压力大小对防止其干燥时翘曲(本文主要指扭曲、瓦弯,下文同)变形的作用。结果表明:对杨木、火炬松、长白落叶松薄板,加压9800~10780N(1000~1100kgf/m2)时,可以有效防止或抑制其翘曲变形。对刺槐、马尾松、湿地松、日本落叶松试验结果不明显,有待进一步研究。
By comparing testing results of drying lumber from fast growing plantation species with and without surface pressuring,the authors proved that different surface pressure affected wood drying warp distortion.But a phenomenon existed that surface pressure of 9 800~10 780 N (1 000~1 100 kgf/m 2) was effective on restraining wood drying warp distortion for thin lumber of populus tomentosa,Pinus taeda and Larix olgensis, and ineffective for thin timber of Robinia pseudoacacia,Pinus massoniana,Pinus elliottii and Larix kaempferi.The reason should be studied further.
翘曲变形干燥基准短周期工业材
Warp distortionWood drying scheduleFast growing plantation species
相关文章
相关作者
相关机构
京公网安备11010802024621