LIANG Min,XU Jian-feng,LIU Ru,et al.Performance Evaluation of Impregnated Paper Decorated Wood-Based Panels with Fragrance-Release Formaldehyde-Free Resin[J].Chinese Journal of Wood Science and Technology,2022,36(03):52-57.
LIANG Min,XU Jian-feng,LIU Ru,et al.Performance Evaluation of Impregnated Paper Decorated Wood-Based Panels with Fragrance-Release Formaldehyde-Free Resin[J].Chinese Journal of Wood Science and Technology,2022,36(03):52-57. DOI: 10.12326/j.2096-9694.2021152.
Performance Evaluation of Impregnated Paper Decorated Wood-Based Panels with Fragrance-Release Formaldehyde-Free Resin
In order to reduce the peculiar smell of the wood-based panels, various contents (with ratios of 0.25%, 0.50%, 0.75%, 1.00%) of aromatic compound were added into the formaldehyde-free adhesive to prepare the formaldehyde-free decorative paper, which endowed the decorative paper with fragrance. The effects of different aromatic contents on the slow-release performance and surface properties of the formaldehyde-free decorative paper surfaced wood-based panels were investigated. The chemical composition of impregnated resin and the surface morphologies of decorative paper were tested and characterized by the Fourier infrared spectroscopy (FTIR) and electron scanning microscope (SEM). The results showed that the aromatic sustained-release performance of formaldehyde-free decorative paper veneer wood-based panels was fairly good. The fragrance released from the testing panels has been detected after 90 days at the room temperature. The aromatic compound was compatible with the adhesive. It did not affect the properties of the impregnated adhesive. The formaldehyde-free decorative paper adhesive film had a moderate sealing effect on aromatic particles, which contributed to the slow-release of fragrance. At the same time, the properties of the surface bonding strength, surface resistance to water vapor, and surface anti-pollution (acetone) of the decorative surfaced panels met the requirements of the standard GB/T 15102—2017 of ",Surface Decorated Fiberboard and Particleboard with Paper Impregnated Thermosetting Reins,".
HU Y B, LIU Y, SUN L, et al. Aroma-releasing characteristics of plywood based on microcapsule technology[J]. Journal of Fujian Agriculture and Forestry University (Natural Science Edition), 2021, 50(2): 283-288.
XU J F, LONG L, LIU R. Research Status Review of Formaldehyde-Free Decorative Paper for Wood-Based Panels[J]. Chinese Journal of Wood Science and Technology, 2021, 35(2): 1-5.
LI X Y, LU X B, LIANG M, et al. Conversion of waste lignocellulose to furfural using sulfonated carbon microspheres as catalyst[J]. Waste Management, 2020, 108: 119-126.
LIU R, LIANG M, XU J F, et al. Dialdehyde starch reinforced polyacrylate-polyethylene glycol resin for impregnated decorative paper with improved toughness and ultra-low formaldehyde emission[J]. Industrial Crops and Products, 2022, 176: 114390.
QIANG T, HAN M, LI X. Synthesis, characterization and fluorescence performance of a novel SAF-based waterborne polyurethane[J]. Progress in Organic Coatings, 2018, 122: 248-254.
XU J F, LI X Y, LIU R, et al. Dialdehyde modified cellulose nanofibers enhanced the physical properties of decorative paper impregnated by aldehyde-free adhesive[J]. Carbohydrate Polymers, 2020, 250: 116941.
Wołosiak-Hnat A, Zych K, Mężyńska M, et al. The influence of type and concentration of inorganic pigments on the polyurethane adhesive properties and adhesion of laminates[J]. International Journal of Adhesion and Adhesives, 2019, 90: 1-8.
FENG Y, QU W, LIU M H, et al. Research Review on Toughening Modification of Melamine Formaldehyde Resin [J]. Chinese Journal of Wood Science andTechnology, 2022, 36(1): 17-21, 74.