Classification of Specially Shaped Solid Wood Components based on Generation Paths of Curved Surfaces

ZHANG Qianchen; XIONG Xianqing

doi:10.12326/j.2096-9694.2025063

DISCUSSION ＆SUGGESTION | Views : 0 下载量: CSCD: 0 CNKI被引量: 0 Crossref: 0 Wos: 0 Scopus: 0 更多指标

PDF
Export
Share
Collection
Album

Classification of Specially Shaped Solid Wood Components based on Generation Paths of Curved Surfaces
College of Furnishings and Industrial Design，Nanjing Forestry University，Nanjing 210037，Jiangsu，China
Vol. 39, Issue 6, Pages: 80-86(2025)
DOI： 10.12326/j.2096-9694.2025063
稿件说明：

移动端阅览

张乾辰,熊先青.基于曲面生成路径的实木异形零部件分类方法[J].木材科学与技术,2025,39(06):80-86. DOI： 10.12326/j.2096-9694.2025063.

ZHANG Qianchen,XIONG Xianqing.Classification of Specially Shaped Solid Wood Components based on Generation Paths of Curved Surfaces[J].Chinese Journal of Wood Science and Technology,2025,39(06):80-86. DOI： 10.12326/j.2096-9694.2025063.

摘要

通过采集实木异形零部件的尺寸、结构、工艺和应用场景等属性指标，对实木异形零部件进行横切处理，确定其横断面特征。基于横断面沿纵向延伸生成曲面的路径，将曲面划分为挤出形曲面与扫掠形曲面，并实现零部件曲面与对应类别的精准匹配，得到挤出形零部件和扫掠形零部件。根据横断面沿中轴线旋转生成曲面的路径，将曲面划分为回转形曲面与螺旋形曲面，完成零部件曲面与对应类别的匹配，形成回转形零部件和螺旋形零部件。若零部件横断面与纵向延展方向均为复杂曲线，则其归类为自由形曲面，并匹配对应零部件曲面，最终形成自由形零部件；同时对不同类别零部件的曲面进行数学描述，以满足实际生产需求。在此基础上，简要阐述分类后零部件的加工工艺和适用设备，明确加工流程，确保分类结果可指导生产实践，为定制化实木家具企业的生产优化与效率提升提供理论依据和实践参考。

Abstract

The specially shaped solid wood components are subjected to cross-sectional processing for determining their cross-sectional characteristics. Based on the path of generating surfaces along the longitudinal extension of the cross-section

the surfaces can be divided into extruded surfaces and swept surfaces

which assist to achieve and precise matching of part surfaces with corresponding categories. Furthermore

based on the path of the cross-section rotating along the central axis to generate the surface

the surface can be divided into a rotating surface and a spiral surface

completing the matching of the part surface with the corresponding category

forming a rotating part and a spiral component. If both cross-section and longitudinal extension direction of a component are complex curves

it can be classified as a free-form surface matching the corresponding part surface

ultimately forming a free-form component. Simultaneously

the surfaces of different categories of components can be mathematically described to meet actual production needs. On this basis

this study examined the attribute indicators

including size

structure

process

and application scenarios

of existing specially shaped solid wood components

briefly explained the processing technology and applicable equipment of the classified components

and clarified the processing flow

which ensured that the precise classification results could guide production practice and provided theoretical basis and practical reference for the production optimization and efficiency improvement of customized solid wood furniture enterprises.

关键词

Keywords

references

熊先青 , 岳心怡 . 中国家居智能制造技术研究与应用进展 [J ] . 林业工程学报 , 2022 , 7 ( 2 ): 26 - 34 .

XIONG X Q , YUE X Y . Research and application progress of home intelligent manufacturing technologies in China [J ] . Journal of Forestry Engineering , 2022 , 7 ( 2 ): 26 - 34 .

李静 , 戴达鹏 , 郭洪武 , 等 . 面向智能制造的实木家具产品数字化设计技术 [J ] . 林业工程学报 , 2024 , 9 ( 4 ): 168 - 175 .

LI J , DAI D P , GUO H W , et al . Digital design technology of solid wood furniture for intelligent manufacturing [J ] . Journal of Forestry Engineering , 2024 , 9 ( 4 ): 168 - 175 .

熊先青 , 符思捷 , 岳心怡 , 等 . 定制家具数字孪生车间构建模式及关键技术 [J ] . 木材科学与技术 , 2024 , 38 ( 6 ): 69 - 78 .

XIONG X Q , FU S J , YUE X Y , et al . Construction and technology of digital twin model in customized-furniture intelligent manufacturing workshop [J ] . Chinese Journal of Wood Science and Technology , 2024 , 38 ( 6 ): 69 - 78 .

XIONG X Q , BAO Y L , LIU H , et al . Study on mechanical and electrical properties of cellulose nanofibrils/graphene-modified natural rubber [J ] . Materials Chemistry and Physics , 2019 , 223 : 535 - 541 .

熊先青 , 杨路洁 , 马清如 , 等 . 实木家具异形零部件生产线平衡优化研究 [J ] . 木材科学与技术 , 2023 , 37 ( 6 ): 20 - 27 .

XIONG X Q , YANG L J , MA Q R , et al . Balance optimization of special part production line in solid wood furniture manufacture [J ] . Chinese Journal of Wood Science and Technology , 2023 ( 6 ): 20 - 27 .

马清如 . 基于平衡设计的木家具异形零部件加工生产线优化研究 [D ] . 南京 : 南京林业大学 , 2022 .

孙庆伟 . 基于事物特性的实木家具异形零部件工艺变型设计方法研究 [D ] . 南京 : 南京林业大学 , 2024 .

马清如 , 熊先青 . 木家具异形零部件分类优化及加工过程 [J ] . 家具 , 2020 , 41 ( 1 ): 23 - 27 .

熊先青 , 曹萌 , 马清如 , 等 . 实木家具异形零部件成组分类与加工方法 [J ] . 林业工程学报 , 2023 , 8 ( 6 ): 186 - 192 .

XIONG X Q , CAO M , MA Q R , et al . Research on group classification and processing method of special-shaped parts of solid wood furniture [J ] . Journal of Forestry Engineering , 2023 , 8 ( 6 ): 186 - 192 .

SMITH M L , SMITH L N , HANSEN M F . The quiet revolution in machine vision-a state-of-the-art survey paper, including historical review, perspectives, and future directions [J ] . Computers in Industry , 2021 , 130 : 103472 .

吴智慧 . 实木家具生产中机械配料的典型工艺与设备 [J ] . 家具 , 2019 , 40 ( 4 ): 1 - 5 .

Alert me when the article has been cited

提交

The Structure and Manufacturing Technology of Wood-Based Composite Door

Structure and Processing Technology of a Solid Doorwith Laminated Wood Materials